深井超深井钻井堵漏材料高温老化性能评价

深井超深井钻进裂缝性油气层极易发生频繁的钻井液漏失,造成严重储层损害和重大经济损失。储层段钻进过程中经常发生重复性漏失,意味着仅用酸溶率、粒度分布等常规堵漏材料评价指标已不能满足钻井液漏失控制工程需要。笔者以塔里木盆地克深气田钻井常用的核桃壳、毫米级碳酸钙为研究对象,开展了堵漏材料高温老化评价实验。实验评价结果表明,在180℃的柴油中老化24 h后,核桃壳的颜色由黄色变成黑色,质量损失率为25.16 % ,摩擦系数下降28.24 % ,抗压强度下降21.21 % ;毫米级碳酸钙的颜色由白色变成淡黄色,质量损失率为2.47 % ,摩擦系数下降1.33 % ,抗压强度基本不变;由高温老化后的核桃壳和毫米级碳酸钙所形成的封堵层,其承压能力下降了48.84 % 。分析指出,堵漏材料高温老化失效是深井超深井裂缝封堵层结构破坏并在储层段发生重复性漏失的一个重要因素。     

Transport Map sampling with PGD model reduction for fast dynamical Bayesian data assimilation

The motivation of this work is to address real-time sequential inference of parameters with a full Bayesian formulation. First, the proper generalized decomposition (PGD) is used to reduce the computational evaluation of the posterior density in the online phase. Second, Transport Map sampling is used to build a deterministic coupling between a reference measure and the posterior measure. The determination of the transport maps involves the solution of a minimization problem. As the PGD model is quasi-analytical and under a variable separation form, the use of gradient and Hessian information speeds up the minimization algorithm. Eventually, uncertainty quantification on outputs of interest of the model can be easily performed due to the global feature of the PGD solution over all coordinate domains. Numerical examples highlight the performance of the method.     

Ab Initio Molecular-Dynamics Simulation Liquid and Amorphous Al_94-xNi₆La_x (x=3-9) Alloys

Ab initio molecular-dynamics simulations have been used to investigate the liquid and amorphous Al94-xNi6Lax (x=3-9) alloys. Through calculating the pair distribution functions and partial coordination numbers, the structure and properties of these alloys are researched, which will help the design bulk metallic glass. The concentration of La atoms can affect the short-range order of Al94-xNi6Lax alloys, which is also studied in this calculation result.     

无失效数据机载多余度EWIS可靠性研究

针对高可靠度机载多余度EWIS各组成部分寿命服从指数分布但参数未知的情况，提出采用无失效数据可靠度分析方法评估EWIS的可靠度水平。通过Monte-Carlo仿真方法对连接形式为“先并联、后串联”EWIS各组成部分寿命进行抽样，利用“最小最大值”方法获得系统寿命的抽样值，用概率纸检验法初步判断EWIS寿命是否服从威布尔分布，再用Pearson拟合优度检验法判断EWIS寿命是否服从威布尔分布。结合无故障飞行时间的样本值与EWIS寿命服从威布尔分布的假设，采用无失效数据分析方法评估EWIS的可靠度水平。研究方法对机载多余度EWIS无失效数据可靠度分析有一定的贡献。     

Filter-based energy-resolved X-ray computed tomography with a clinical imager

Filter-based energy-resolved X-ray computed tomography (CT) is an approach for implementing energy-resolved CT imaging using a flat-panel-detector-based cone-beam system. In this study, we performed experiments with a 20-cm-diameter phantom on a clinical X-ray imager. The material density results showed good agreement with the ideal values. We also propose an improved method for obtaining the detector response function and the X-ray spectrum, which requires fewer measurements and will be practical for future clinical use. Issues such as scatter and image noise remain to be addressed.     

On the Barzilai-Borwein basic scheme in FFT-based computational homogenization

Building upon the equivalence of the basic scheme in the work of Moulinec and Suquet with gradient descent methods, we investigate the effect of using the celebrated Barzilai-Borwein step size selection technique in this context. We provide an overview of recent convergence theory and present efficient implementations in the context of computational micromechanics, with and without globalization. In contrast to polarization schemes and fast gradient methods, no lower bound on the eigenvalues of the material tangent is necessary for the Barzilai-Borwein scheme. We demonstrate the power of the proposed method for linear elastic and inelastic large scale problems with finite and infinite material contrast.     

小型机载激光通信系统设计与验证

针对空空宽带高速通信的需求，设计了小型化机载激光通信系统。仿真分析了300 km、2.5 Gb/s无线激光链路性能，并通过运动仿真台模拟机动环境测试了系统的跟踪与通信性能，其中粗跟踪误差为533.2 μrad(1σ)，精跟踪误差为3.6 μrad(1σ)，测试数据传输240 s，通信误码率为2.82×10-9。仿真与实验验证了该系统用于远距离空空无线激光通信的可行性。     

基于OpenFOAM的过冷流动沸腾数值模拟

过冷流动沸腾现象被广泛应用于工业生产和动力系统中，对该现象的准确预测是两相流CFD模拟的重要研究方向。本文详细阐述了该模拟过程中的欧拉两流体模型及相关辅助模型，基于开源CFD平台OpenFOAM，模拟了4.5 MPa下竖直圆管内的过冷流动沸腾，得到了截面空泡份额、液相平均温度及壁面温度沿轴向的分布。计算结果与实验值符合良好，说明了模型的有效性和程序的正确性。本文可为在OpenFOAM中添加新的模型及开发新的求解器以模拟过冷流动沸腾问题提供参考。     

Multiphase topology optimization with a single variable using the phase-field design method

In this study, a multimaterial topology optimization method using a single variable is proposed by combining the solid isotropic material with penalization method and the reaction-diffusion equation. Unlike ordinary multimaterial optimization, which requires several variables depending on the number of material types, this method intends to represent various materials as one variable. The proposed method combines two special functions in the sensitivity analysis of the objective function to converge the design variable into prespecified density values defined for each of the multimaterials. The composition constraint based on a normal distribution function is also introduced to estimate the distribution of each target density value in a single variable. It enables density exchange between multiple materials by increasing or decreasing the amount of a specific material. The proposed method is applied to structural and electromagnetic problems to verify its effectiveness, and its usefulness is also confirmed from the viewpoint of cost and computation time.